How it works
The WaveMaker Pro’s electronics include a sophisticated “band pass filter” analogous to the filter in your car radio that lets you listen to one broadcast station at a time. The band pass filter of the WaveMaker Pro only allows the frequencies to pass through according to either the manual settings on the front panel or from the more detailed settings in the WaveMaker Pro software on a personal computer.
The WaveMaker Pro can filter out everything except one frequency or a band of frequencies (adjustable) or it can sweep through the entire range of the filter letting each frequency through for just one cycle of its oscillations (also adjustable). This sophisticated filter is actually made up of four high quality analog filters that cover a frequency range from 0 Hz (ultra fine direct current) to 1 million Hz. This is an enormous improvement over previous devices whose band pass filter only covers a frequency range from 10 Hz to 150 kHz, a small fraction of the range of the WaveMaker Pro.
Using resonance testing techniques such as kinesiology and/or Precision Galvanic Skin Response testing (EAV), it is possible to identify the resonant frequency of the patterns of energy that need to be debugged and the ones that need to be upgraded. The WaveMaker Pro can be set to filter out only those energy patterns from the body according to its settings determined by testing.
The WaveMaker Pro is not a frequency generator. It does not produce any “technically generated” frequencies or wave forms. It picks up the frequency information from either the body or from substances or special test ampoules called analog modules. This source information is then conducted into the device, electronically processed and sent to the body as either a debugging or upgrading signal. It uses the principle of wave interference from physics to cancel out or strengthen the resonance of different patterns of energy in the body, mind and/or emotions.
The WaveMaker Pro is extremely safe. First of all, the energy levels of its output is in the micro volt range. The maximum output voltage is only 1/2 of a volt. To put this in perspective, if you were to hold the ends of a 9 volt battery between your thumb and index fingers (you don’t feel anything at this voltage level) you would be receiving 36 times the voltage of the maximum output from the WaveMaker Pro. Probably the biggest danger from theWaveMaker Pro would be to drop it on your foot! Even this won’t do much because the WaveMaker Pro is light weight, only 2.5kg.
The WaveMaker Pro runs on four C cell rechargeable batteries. The batteries are removed for recharging so its output cannot be influenced by standard household electrical current. The cables are shielded so that they do not act as antennas and don’t pick up the signals of cell phones and other kinds of electronic disturbances. This keeps the signal coming to and from the body extremely pure.
It even has a special circuit in its electronics that senses if the energy level of the output signal is becoming too strong or if there is any outside interference signal. If such signals are detected the WaveMaker Pro’s electronics give an error tone for three seconds after which the unit shuts off automatically. This prevents “feedback” (think of a microphone being held too close to a loud speaker) and any other unwanted signals from being able to reach the body. All of these precautions in the design of the WaveMaker Pro keep the signal coming to and from the body extremely clean, pure and safe.
- Frequency Range: 0 to 1000kHz (1MHz).
- Equipped with 1 Glass Fiber interface
- PC-Software with 300 pre-defined settings
- 8 High Capacity Rechargeable Batteries
- 2 Shielded High-Frequency Cables (red/green)
- 2 Brass rod Electrodes
- Operating Manuals Upgrade WaveMakerPro Software V3
- The system also includes a dedicated laptop with all software and training materials installed
Installed training includes:
- The full Squeaky Clean Program Training also known as Extraordinary Wellness Coach Training
- WaveMaker Mastery Program course access – 21 recorded classes accessible via the web – thorough training in how to debug the Core Dynamics of Human Conditioning with both the WaveMaker and the Pure Awareness Techniques
- The 12 Core Dynamics of Common Problems - 2 day seminar (audio)
- HSE level 1 – 2 day training (video)
- Debugging the Core Dynamics (3 Day training (video)
- (Total Training value = $9,453)
Included now with the WaveMaker Pro is the WaveScanner which is a software and hardware combination that allows you to easily and quickly create individualized therapy programs for virtually anything. Training for this is also provided as three recorded webinars on the Internet. It is very easy to use and we’ve been getting mind-blowing positive results with it.
For on-going support we have several email discussion lists. There is a private list for technical questions and discussion called the HCNI Mastery group to which you are invited to join when you purchase an WaveMaker Pro. You may join the public discussion group at any time.
Price $17,897.00 - Add to Cart
To join the general discussion list for Human Software Engineering send an email to: HumanSoftwareEngineeringfirstname.lastname@example.org.
|WaveMaker Pro Technical Information|
Band pass filter range
O Hz (DC) to 1 million Hz
0 .1 to 100 times source information
Processing modes (phase relationship)
Debug (inverse) Upgrade (non-inverse)
Operating time of charged batteries
8 to 12 hours
|PC software control||Extensive and highly adjustable|
|Preset programs for different conditions||160 (more under development)|
|User program database||Up to 20,000 programs|
Dimensions (width, depth, height)
310cm / 270cm / 115cm
The WaveMaker Pro does not include a personal computer. It can be used in “stand alone” mode for many applications. However, to access the full scope of its capabilites available through the WaveMaker Pro software, you will need to connect it to PC (not included). You must use your own desktop or laptop PC. The connection between the WaveMaker Pro and your PC is via a fiber optic cable. This means that the signals sent to theWaveMaker Pro to control its electronics are impulses of light. These impulses of light are then converted back into electronic information inside the WaveMaker Pro to control the various adjustable parameters of its electronics such as frequency, amplitude, etc. The specifications for the PC in order to run the WaveMaker Prosoftware are:
Minimum System requirements:
- Standard PC such as Celeron 366MHz or Pentium processor
- 128 MByte RAM minimum
- 10 MByte free disk space, approx.
- CD-ROM drive to install the software
- One free RS232 interface exclusively for the Fiber Optic
- On laptops it is recommended to have a free USB port and to use a USB to Serial port converter (included with the WaveMaker Pro) for optimal fiber optic transmission
- Monitor resolution 1024×768 recommended
3. Operating System
- Win98 ME
- Win XP
- Windows 7
(It is recommended that there not be too many background tasks running on low speed systems. These are the little icons on the lower right corner of the screen. If there are too many of these there might be an unpredictable delay in the communication. On ‘fully packed systems’ running below 1GHz a delay of several seconds is possible.)
Click here to access the software upgrade for the WaveMaker Pro as well as pdf files of various operating manuals for the device. A user name and password are required to access the page, which come with the purchase of the device. If you have any questions, please contact Tom Stone at email@example.com.